Engine and brace
instalation.
Updated 3/3/04
Your main frame should look
like the one shown here.
For this step you will
need a .46 engine, 12.25 X 3.75 prop, 2 1/4'' spinner, engine mount, 1/16''
piano wire
Center the engine in the
opening of the main frame.
Then secure the motor
mount to the firewall.
Mount the prop and a 2
1/4' spinner.
Bend
the top frame brace and mount it as shown here.
(Do not solder the top
of the top brace until directed to do so.)
Bend the lower frame braces and mount them
as shown.
Now you can solder the top frame brace in
place.
This will complete this
step.
If you have questions
just ask I am always glad to help when I can.
It will also help me (if you have a
problem) to let me know which step your on.
Email your questions or comments to me
at: