If you have questions just ask and I will
help in any way I can.
This page will show you the difference between the stock and
modified intakes.
You can always Click the pictures to
enlarge them.
ENJOY YOUR VISIT!
Shown here the modified carb gasket will not work on the stock
intake.
If you make a gasket be sure it covers the sloted area that circles half
way around the intake hole.(seen on the right side of the hole on the intake
mounted to the cylinder) If it does not cover this slot. The fuel pump in the
carb will not work and you will not get the proper fuel flow.
Here is a shot of the modified intake with the gasket in place.
This is "WRONG" Please be sure you place gaskets on the correct way. See
picture below!
This is the "RIGHT" way to install the modified gasket. (Note: The hole
lines up with the hole that feeds the pump side of the carb)
Here the modified intake is set on the big bore carb and the gasket is
set inplace.
View of the cylinder side of the stock intake and the carb side of the
modified intake.
View of the carb side of the stock intake and the cylinder side of the
modified intake.
