The Red Super Sports .40 (ARF).


Click on the pictures to enlarge them!


Here are a few pictures of the Red Super Sports .40 (ARF) model I fly.
This really is a nice model to fly.


The Model comes well packed.


This ARF even includes a painted pilot as well as a painted canopy.


The model is very easy to put together.


I added a piece of antenna tube between the fuselage sides in the front to help keep the sides from vibrating at the nose. I added a quick fill fitting as well.


Here I added a nose gear brace at the bottom of the firewall. This helps support the gear. You can also add a piece of 1/4" X 1/4" hardwood if you don't have a extra bracket.


I added a antenna tube that exits just under the rudder. Note the rear canopy mounting tube near the bottom just in front of the bulkhead. I mounted the receiver in front of the servo tray and the battery behind the servo tray as shown here. I use Z bends on all linkage at the servos.


Here is a good look at the way I layed things out.


 Click Here to view many tips used when building models.


 

This Banner will take you back to the Main page!